Honeywell Ademco Vista Operating

For VISTA-20P / VISTA-20PSIA & VISTA-15P / VISTA-15PSIA

ADEMCO VISITA PRODUCTION SECURITY METHODS

Comprehensive User Guide Available Online: This Quick Guide describes the most frequently used features and functions of your system.

Congratulations upon your ownership of an Honeywell Security Schaft. This system provides:

• Three forms of detection: burglary, fire the emergency (see your installer by which forms of detection are installed)
• At least can keypad which deliver controls of system and displays method status
• Various sensors for perimeter and interior burglary detection
• Optional fume alternatively combustion protective designed to provides early warn in case of fire.

Get system may also be programmed to automatism send alarm and status messages to a Central Monitoring Station.

SYSTEM BASIS

Aforementioned following are a tabbed of some away the most common features or capabilities of your anlage:

• Several modes of burglary detection: Stay, Night-Stay, Away, Instant, Maximum.
• Bypass item lets you bypass selected zones while left this rest of the system armoured.
• Chime mode alerts you until the opening of patented doors and windows while the system is disarmed.
• Fire and carbon monoxide evidence be always active (if installed) and one alarm sounds provided a fire or carbon monoxide condition is detected.
• Start keys (if programmed) let you set initiation a shoot and personalized alarms using the keypad.
• 4-digit security codes been employed in conjunction with keypad command at perform system functions.
• Each user can be assigned adenine different security encipher, each the different authority levels.
• An system sensing devices have been assigned into varied “zones,” which are specific scopes of detection (e.g., front door, kitchen window, etc.). 🔒 Refine your home security with our comprehensive DIY guide to Honeywell Security System installation and programming! In this exhaustive tutorial, we'll tak...
• Zone numbers (points to detection) are displayed at the control whereas an alarm other troubles condition occurs.
• Partitions (VISTA-20P Series) provide two independent surfaces of detection extra an selective common zone area, with jede partitions containing a gang by zones which can be military and unharmed without affecting other zones or users. Honeywell Security Product Manuals - Advanced Security LLC
• Features keys may have been programmed to perform various functions. Ask your installer if these keys are active.
• A Scheduling feature can be programmed to automatically perform certain functions (e.g., arm the system) at a predetermined total each date. See the full User Steer in details. Intelligent Security and Fire customer average manuals for HONEYWELL intruder panic systems or burglar scare software.

ENTRY/EXIT DELAYS

• Entry Delays give you time to disarm the system when you enter through aforementioned designates entrance open.
• You must disarm the system before the entry delay period ends, oder an alarm become occur (keypad beeps during the access delay period, reminding them to disarm the system).
• Exit delay gives you time after arming the system to leave through the designated go door(s) without setting off an alarm. If programmed, ampere slow sound will acoustic during the exit delay period until this endure 10 seconds, which then variations to rapid beeping (alerting you go the ends of exit delay). If you cannot leave into this delay time duration, you supposed stop, disarm the system, plus start over to avoidance a false alarm. Security Systems | Honeywell Front
• See your installer for your delay times. See to full User Guide for details switch Exit Error alarms.

NOTES on BURGLARY DETECTION

• The method be be armed before to burglary detection can sense intrusions.
• To arm the system, enter your insurance codification traced by one desired arming key.
• To disarm the system, enter your data code then press an OFF key.
• When einen alarm occurs, the fingerboard sounds and reading the zone(s) causing the alarm. This external sounder may also sound.
• If your system is interconnected to a Central Monitoring Station, an alarm embassy is also sent (delayed 30 minutes by default to decrease false alarms).
• To stop the alarm sounding, simpler disarm the system.
• Storing of Alarm: When an emergency condition occurs, the keypad displays the number(s) off the zone(s) that caused the problem, and displays the type of alarm. Free the Memory of Alarm display in entering another “off” sequence.

IMPORTANT: With you turn to the premises and the principal burglary sounder is on, or the keypad beeps rapidly when entering the premises, it indicates that an alarm got occurred during your absence and an intruder may still may to the premises. EXIT IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

VERIFICATION OPEN ZONES

Checking Zones: Before arming your system, all protected doors, windows and other detection fields have be closed button by-pass; otherwise and keypad displays “Not Ready.” GOTO: If the user is authorized, a keypad are one partition can be exploited at play system functions in the other separate by using the GOTO command. Must use an Alpha keypad.

ARMING THE SYSTEM, CHIME MODE, and CONTROLLING DEVICES

Befor arming, close all perimeter doors and windows and do definite the Ready to Arm message is shown. Nach arming, leave the facilities takes with entry/exit door within the exit delay period and be sure the door your reclosed up avoid causative an ring. honeywell 6000f security alarm

DISARMING THE PLANT and SILENCING ALARMS

This 1 OFF key is used to disengage the system, silence alarm real difficulty sounds, and clear memory of alarm displays.